AXR 8460 MG-D

Product and selection

Mini servos offer additional torque options within a compact envelope. Check output-shaft position, mounting-hole spacing and connector clearance together. A longer servo arm reduces available linkage force; model names and peak torque alone do not establish compatibility.

Performance by voltage

Stall torque is not a continuous load rating. Consider rated torque and duty cycle when sizing the mechanism. The operating range specifies allowable supply voltage; it does not imply that test data exist at every voltage.

Drawing and tabulated dimensions may use different datums. Confirm the final mounting drawing and interface version before machining mating parts.

Mechanical and control specifications

Operating voltage

4.8–8.4 V

Rated torque

1.5 kg·cm @ 7.4 V

Dimensions

23.5 × 11.8 × 27.9 mm

Weight

16.7 g

Motor type

Iron-core motor

Gear material

Stainless steel gears

Bearing count

2

Lead length

250 mm

Control signal

PWM

Operating frequency

333 Hz

Reference pulse width

1520 µs

Pulse width and angle

500 / 1500 / 2500 µs → -90 / 0 / 90°

The source lists a 1520 µs reference pulse and a 1500 µs position centre. Confirm the neutral setting and usable travel for the controller and delivered version.

Mounting dimensions

Drawing and tabulated dimensions may use different datums. Confirm the final mounting drawing and interface version before machining mating parts.

Installation and integration

Check the supply, pulse width, mounting pattern and arm connection first. Commission with the load removed or limited, verify centre position, direction and mechanical travel, then validate the working load gradually. Allow for transient current and prevent voltage drop, reversed connections and sustained contact with mechanical stops.

Read the servo selection guide ↗