SV-EDR supports inspection, observation and specialist tasks in hazardous environments, with project-specific payload integration. Confirm explosion-protection suitability and configuration in the delivery documentation.
The SV-EDR seven-degree-of-freedom arm, 1200 mm reach and multiple cameras support assessment of remote observation and object-handling tasks. An 80 kg chassis payload and ≥5 kg lift at full arm extension describe different conditions. The source name “explosion-proof robot” is not accompanied by an explosion-protection rating or certificate.
Final configuration depends on operating conditions and the agreed specification.
A tracked chassis and multiple cameras let the operator observe from a distance, while the manipulator supports handling within the configured limits. Obstacle and slope ratings aid terrain assessment but depend on load, traction and centre of gravity. Confirm video range and control range separately.
Specify passage width, steps, slope, object mass and pickup position to select reach and gripper. Chassis payload is not the arm’s tip-load capacity. For flammable gas, heat or immersion, confirm the required rating and certificates first; IP65 does not prove those capabilities.
Check driving direction, camera views, arm limits and gripper action on level controlled ground. Add load gradually and verify stability at full extension and stopping response. Secure the battery and keep wiring clear of tracks and joints. Keep people outside the arm sweep and pinch zones.
After each mission, check track tension, debris, joint fasteners and camera cleanliness; charge and store the battery as specified. If video or control becomes unreliable, stop movement before diagnosing power and communications. After impact, water exposure or significant overheating, inspect before returning to service.
Final configuration depends on operating conditions and the agreed specification.
| Model | SV-EDR |
|---|---|
| Category | Robotic systems |
| Folded / storage dimensions | 898 × 700 × 660 mm (L × W × H) |
| Unfolded / working dimensions | 1103 × 700 × 660 mm (L × W × H) |
| Maximum working height | 1510 mm |
| Fully extended vehicle length | 2100 mm |
| Chassis mass | ≤80 kg (including quick-release battery; configuration dependent) |
| Rated payload | 80 kg |
| Maximum drive power | 2 × 400 W |
| Manipulator degrees of freedom | 7 |
| Lift at full arm extension | ≥5 kg (fully extended) |
| Battery specification | 24 V, 40 Ah |
| Wireless video range | ≥500 m |
| Travel speed | 8 km/h |
| Obstacle height | 180 mm |
| Stair-climbing angle | ≤38° |
| Slope angle | ≤40° |
| Minimum ground clearance | 138 mm |
| Maximum arm reach | 1200 mm |
| Upper-arm elevation | -35 ~ 160° |
| Forearm elevation | -120 ~ 150° |
| Wrist rotation | -120 ~ +150° |
| Camera configuration | 1 × 30× zoom 1080P + 3 × 720P |
| Turning mode | Zero-radius turn |
| Nominal operating / flight time | 3 h |
| Ingress protection (source) | IP65 |
| Arm rotation | 0 ~ 360° |
| Gripper opening | 0-160 mm |
| PTZ tilt | -30 ~ +90° |
| PTZ pan | 360° continuous |
| Driving-camera field of view | 170° |
Documentation covers dimensions, performance data and operating requirements. Contact Mr. Liu for selection advice or after-sales support.
Final configuration depends on operating conditions and the agreed specification.
