SV-T10 combines rapid deployment with extended airborne operation for lightweight mission payloads and mobile support projects.
The SV-T10 source lists a 10 kg rated payload, eight motors and a 23.6 kg airframe, paired with a 15 kW W10 ground station. The mission mass budget should include mounting hardware, wiring and the airborne share of tether weight as well as the payload itself.
Final configuration depends on operating conditions and the agreed specification.
A tethered system keeps its main power equipment on the ground and supplies the aircraft through a cable. It can support assessment of sustained lighting, observation and communications over a fixed area. The ground station, airborne power unit, backup supply, tether and reel must be matched as one system.
Confirm payload mass and power, station-keeping time, target height and site supply. Then assess tether mass, voltage drop and wind loading. Cable length is not usable vertical height: angle, sag, ground routing and obstacles consume length. Ground-station ratings from different versions are not interchangeable.
Before deployment, inspect connector locks, cable insulation, strain relief, cooling and protective grounding. Make connections with power isolated. Follow the fitted controller’s instructions for startup, voltage and backup power. Controlled commissioning should verify reel operation and responses to communication or primary-power loss.
Monitor voltage, current, payout and reel behavior during operation; keep the tether clear of people and obstacles. Afterwards inspect wear, bends, connectors and abnormal heating. Return-to-home or landing behavior must suit the tethered operating envelope and be validated on the fitted system, rather than copied from free flight.
Geometry follows the source. Verify the actual model and approved drawing before installation.
Final configuration depends on operating conditions and the agreed specification.
| Model | SV-T10 |
|---|---|
| Category | Tethered drones |
| Motor-to-motor diagonal | 1240 mm |
| Unfolded / working dimensions | 1380 × 1380 × 740 mm |
| Folded / storage dimensions | 630 × 630 × 700 mm |
| Product mass | 23.6 kg |
| Number of motors | 8 |
| Maximum output per motor | 1500 W |
| Maximum thrust per motor | 16 kg |
| Rated payload | 10 kg |
| ESC rated voltage | 380-400 V DC |
| ESC rated current | 6 A |
| Propeller diameter × pitch | 28 × 8 in |
| Propeller material | Carbon-fibre composite |
| Ground-station model | W10 |
| Ground-station mass | 45 kg |
| Ground-station dimensions | 600 × 600 × 600 mm |
| Ground-power input | 380 V AC, 50-60 Hz |
| Ground-power output voltage | 400 V DC |
| Rated ground-power output | 15 kW |
| Tether length | 100 m |
| Automatic reel speed | 1 m/s |
| Nominal generator-powered flight duration | 8 h |
Documentation covers dimensions, performance data and operating requirements. Contact Mr. Liu for selection advice or after-sales support.
Final configuration depends on operating conditions and the agreed specification.
