SV-T2 is designed for lightweight, sustained airborne tasks where portability and straightforward deployment are priorities.
SV-T2 targets portable tethered projects. The available attachment labels the aircraft T1 and the ground station W2, with conflicting voltage descriptions. Treat its figures as legacy reference data. Establish payload mass, available power and deployment space before confirming a matched system.
Final configuration depends on operating conditions and the agreed specification.
A tethered system keeps its main power equipment on the ground and supplies the aircraft through a cable. It can support assessment of sustained lighting, observation and communications over a fixed area. The ground station, airborne power unit, backup supply, tether and reel must be matched as one system.
Confirm payload mass and power, station-keeping time, target height and site supply. Then assess tether mass, voltage drop and wind loading. Cable length is not usable vertical height: angle, sag, ground routing and obstacles consume length. Ground-station ratings from different versions are not interchangeable.
Before deployment, inspect connector locks, cable insulation, strain relief, cooling and protective grounding. Make connections with power isolated. Follow the fitted controller’s instructions for startup, voltage and backup power. Controlled commissioning should verify reel operation and responses to communication or primary-power loss.
Monitor voltage, current, payout and reel behavior during operation; keep the tether clear of people and obstacles. Afterwards inspect wear, bends, connectors and abnormal heating. Return-to-home or landing behavior must suit the tethered operating envelope and be validated on the fitted system, rather than copied from free flight.
Final configuration depends on operating conditions and the agreed specification.
| Model | SV-T2 |
|---|---|
| Category | Tethered drones |
| Motor-to-motor diagonal | 670 mm |
| Unfolded / working dimensions | 740 × 740 × 400 mm |
| Folded / storage dimensions | 430 × 430 × 400 mm |
| Product mass | 5.6 kg |
| Number of motors | 8 |
| Maximum output per motor | 430 W |
| Maximum thrust per motor | 2.4 kg |
| Rated payload | 1 kg |
| ESC rated voltage | 24 V DC |
| ESC rated current | 6 A |
| Propeller diameter × pitch | 15 × 5 in |
| Propeller material | Carbon-fibre composite |
| Ground-station model | W2 |
| Ground-station mass | 18.7 kg |
| Ground-station dimensions | 550 × 400 × 300 mm |
| Ground-power input | 110-220 V AC, 50-60 Hz |
| Ground-power output voltage | 400 V DC |
| Maximum ground-power output | 3 kW |
| Tether length | 50 m |
| Automatic reel speed | 1 m/s |
| Nominal generator-powered flight duration | 8 h |
Documentation covers dimensions, performance data and operating requirements. Contact Mr. Liu for selection advice or after-sales support.
Final configuration depends on operating conditions and the agreed specification.
